Search:

Your right. They just have the rear listed. Contact Jetstream Motorsport.

I would label this tread as unfounded internet Propaganda

You can get them from South West Lotus Centre.

Here is another discussion on where to get the switch.

http://www.nobleforums.com/showthread.php?11713-Another-backup-light-switch-alternative-with-connector!&highlight=another+backup

Do you have a part number or what car it is off of.

Because the radiator does not have a drain plug the easiest way to drain the coolant is to just remove the front left wheel and undo the lower rad hose. But only about 60% will come out by doing...

Where is 1g?

It should be the same as the Noble. 22oz per the Noble build manual.

I spoke with Jason a few weeks ago. They are working on a new drivetrain design. Can your carbon car be driven on the street or is it for track only?

This is the only place I have seen that has covers.

https://www.raidenperformance.com/_p/prd1/4260858255/product/noble-rossion-custom-car-covers---indoor-%26-outdoor

did you get the carbon...

12569

6pk1700

This looks like the part but without the O ring cap. Maybe the Ford dealer has a diagram with the O ring part number
...

Congrats and best of luck. What state you in.

Newton is the supplier of the caps

https://www.newton-equipment.com/aero-200-filler-cap.html

Also interested if they sell just the o-rings

email sent

I would take 2 and I can provide a blue print.

Thanks GAF. It feels like the gates are slightly off center. I was going to adjust the top cable (the side to side adjmt cable) at the trans side and wanted to know if there were any adjustments at...

Anyone know what the Rossion shifter mechanism is comprised of under the center console. Curious to know if it is gated and whether there are any adjustments under there.

The US AER engines do not have brass squirters. NobleM400 did a nice job rectifying this.

http://www.nobleforums.com/showthread.php?9817-engine-rebuild-thread/page2&highlight=oil
...

I thought glass was shipped in a wooden crate.

what are you looking to do.

Bolt pattern 5 x 120. Front wheel is 18x8 with an offset (ET) of 24mm. Rear wheel is 18x10.5 with an offset (ET) of 42mm.

1233412335

Wade your mailbox is full. Inform the forum Moderator that you are an owner so they can provide you with more mail storage.

A heads up that the master is a 7/8 (.875") bore. The bore size is etched on the bottom of the master as 0875 followed by the part number CP3627-101C. Also be aware that not all model CP3627-101C...

Rebuild kits are available see below.


The master cylinder kit part number is CP3627-21RK.

Please contact:
Essex Part Services Inc
125 Hampton Court,
Cramerton,
North Carolina 28032