Will
Does it run at one speed all the time?
Will
Does it run at one speed all the time?
Two speeds 700 psi constant and when you take it to lock it jumps to 1000 psi
I am wondering if you have any photos of your installation.
What causes my power steering pump to moan/hummm when I'm at an auto X and there is a lot of quick tight turns?
Thanks,
Ken
Last edited by Joel; 11-05-2017 at 09:37 AM.
Joel
'67 Lotus Elan S3 DHC (owned since 1970)
'17 Ford Focus RS
Any way to fix the problem with a Noble besides going to electric p.s.
Ken,
A -10 or -12 size reinforced hose should be the supply to the pump on the suction side. And a -8 should be the low psi return. Make sure are no kinks or issues with the hose sizing or condition.These two hoses are important. One is gravity feed to pump and the other low psi return. Flow needs to be good threw these two.
Also any run longer on the three feet on the return should consider larger than -8
Last edited by cooch8c; 11-05-2017 at 07:29 PM.
i will try to get some picks of the install when i am back in town