New Rotors

[gafernandez]

This more of a cosmetic question

I am getting ready to order a new batch of rotor parts and as you all know the rotors are interchangeable on the Noble / Rossions except for the 4 stud verses 5 stud hub.

The issue i run into all the time is that i always have the wrong one in stock, the only solution to keep cost down is to put both bolt patters that only have a cosmetic effect on the part would you be up set if you received a unit like the picture with both bolt patterns

[MITengineer]

This more of a cosmetic question

I am getting ready to order a new batch of rotor parts and as you all know the rotors are interchangeable on the Noble / Rossions except for the 4 stud verses 5 stud hub.

The issue i run into all the time is that i always have the wrong one in stock, the only solution to keep cost down is to put both bolt patters that only have a cosmetic effect on the part would you be up set if you received a unit like the picture with both bolt patterns

If there were no issues with functionality, I wouldn't care!

- Chris

[gafernandez]

no issue with the rotors they are hub concentric, the bolt holes are just for clearance because clamping action to create friction to the rim is what is used to not allow them to not rotate

[cooch8c]

Would make no difference to me.

[ken7258]

Makes no difference to me.

[tigerlam92]

If there were no issues with functionality, I wouldn't care!

- Chris

Same here.

Cheers,
Hugh

[ashanson]

Are these your floating rotors or just stock replacements?

[gafernandez]

Yes they are floating in disk in the front and in the hat in the rear, These are also 345 x 30 front and 338 x 26 rear

[Bill]

Willy,

I am running original brake rotors on my M400. Rears are in great shape, with minimal wear. Fronts are worn to about 28.5mm. As you pointed out, new front rotors are 30mm wide. Do you know what the recommended minimum width is?

Even if my fronts are still serviceable, I should order new front rotors to have them on hand. I assume that your new rotor design also requires your new bell design, right? What's your current price for complete front left and right rotorassemblies?

[gafernandez]

I have everything from stock replacements to full floating C7 corvette setups. I PM you call me