Results 1 to 2 of 2

Thread: Wiring from Engine Bay to Cockpit

  1. #1
    Join Date
    May 2008
    Location
    Chattanooga TN
    Posts
    791
    Rep Power
    13

    Default Wiring from Engine Bay to Cockpit

    What is the experience of most people was the best or easiest way to run various cables from the engine compartment and into the cockpit, up to the dash.

    Thanks

  2. #2
    Join Date
    Apr 2007
    Location
    California
    Posts
    298
    Rep Power
    10

    Default

    Two ways to go. One is up the center tunnel, the second is under the door sill on either side.

    The center tunnel is the easiest, but you have to be careful that the heat from the front manifold/turbo/downpipe doesn't damage your wiring. Also, make sure that your wiring doesn't block any of the bottom vents, or interfere with the shifter or hand brake.

    The door sills require more dissassembly to access, but have tons and tons of space for cables. Also, it's easier to keep cables away from any potential hot spots or moving parts.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •