Results 1 to 5 of 5

Thread: M400 MBE to Ford ECU

  1. #1

    Default M400 MBE to Ford ECU

    I've read several threads about people switching to the Ford ECU for their Nobles, but there seems to be some details missing.
    I'm curious as I want to do this for the OBD2 aspect, and for easier access to tuners.

    From what I understand, the following is needed:
    - Rossion engine harness
    - Ford ECU
    - MAF?


    Does anyone know WHICH Ford ECU is needed? Or does it have to be from Rossion? I understand Rossion doesn't sell engine harnesses...
    If a MAF is required, which Ford MAF?


    Just trying to wrap my head around what all is needed to do this swap and if it's a viable option.

  2. #2

    Default

    Umm, Last time I looked Rossion had the whole "Kit" on their website for about $6,000.

    It includes:
    OBD2 PCM
    Engine harness
    Two O2 sensors
    Mass airflow meter with 3" tube
    Adjustable boost controller
    Water temp sender with adapter
    Idle air control valve
    Two 3" T-bolt clamps
    Intercooler to MAF silicone hose
    MAF to throttle body silicone hose
    2.5" adapter pipe
    Vacuum hose
    Body harness plug
    Go to http://rossioncars.com/shopping/ then
    Home
    Engine Components
    Engine Management System - M400 Upgrade
    Cheers.

  3. #3

    Default

    You might also check with Gafernandez here, I believe he has 1-2 of these setups for sale off Q1's he has converted to V8s

  4. #4

    Default

    Quote Originally Posted by DukeGrail View Post
    Umm, Last time I looked Rossion had the whole "Kit" on their website for about $6,000.

    It includes:
    OBD2 PCM
    Engine harness
    Two O2 sensors
    Mass airflow meter with 3" tube
    Adjustable boost controller
    Water temp sender with adapter
    Idle air control valve
    Two 3" T-bolt clamps
    Intercooler to MAF silicone hose
    MAF to throttle body silicone hose
    2.5" adapter pipe
    Vacuum hose
    Body harness plug
    Go to http://rossioncars.com/shopping/ then
    Home
    Engine Components
    Engine Management System - M400 Upgrade
    Cheers.
    Good find, thanks!

    downside is, I have a handful of that stuff, just not the major bits...

    I shot Willy a message, waiting for a reply.

  5. #5
    Join Date
    Dec 2009
    Location
    SugarCreek (Dayton), OH
    Posts
    1,682
    Rep Power
    15

    Default

    I did not get a message

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •